Description
MCT Brattberg EMC EX System:
The MCT Brattberg EMC EX System combines electromagnetic compatibility (EMC) protection with explosion-proof design. This system provides fire, gas, and water tightness while ensuring that the installation is both EMC-protected and explosion-proof. It is suitable for use in offshore oil and gas installations and other high-risk environments with sensitive electronic equipment.
Key Features:
- EMC protection
- Explosion-proof design
- Fire, gas, and water tightness
- Modular design for flexibility
- Suitable for a wide range of cable and pipe sizes
Applications:
- Offshore oil and gas installations
- High-risk environments with sensitive electronic equipment
- Bulkheads and decks in marine and offshore installations
Certifications:
- Compliant with SOLAS Chapter II-2, Regulation 9
- Tested according to NVIC 9-97, CH-1, Enclosure (1), Section 2.13.2
- Meets 46 CFR 111.105-15 requirements
Supporting Citations:
- SOLAS Chapter II-2, Regulation 9: “The division shall be constructed to prevent the passage of smoke and flame for a specified period, and the insulation shall be such that the average temperature on the unexposed side will not rise more than 140?C above the original temperature, nor will the temperature at any one point, including any joint, rise more than 180?C above the original temperature, within the time listed below.”
- NVIC 9-97, CH-1, Enclosure (1), Section 2.13.2: “Penetrations through divisions which are required to be C-class smoke tight do not require approved fire stops but shall be tight fitting so as not to pass smoke.”
- 46 CFR 111.105-15: “Penetrations must be sealed with approved firestop materials or constructed in a manner that prevents the passage of fire and smoke.”